IMPROVEMENT IN OUTPUT POWER BY DESIGNING ADAPTIVE REFERENCE CONTROL FOR BOOST CONVERTER IN SOLAR SYSTEM

  • Sandeep Kumar M.Tech Scholar Technocrats Institute Of Technology Science, Bhopal (M.P.)
  • Brijesh Roshan Sahu Assistant Professor Technocrats Institute Of Technology Science, Bhopal (M.P.)

Abstract

Maximum power point tracking (MPPT) techniques are used in photovoltaic (PV) systems to maximize the PV array output power by tracking continuously the maximum power point (MPP) which depends on panels temperature and on irradiance conditions. In this work we have made a comparison between P & O algorithm with proposed adaptive reference algorithm. It has been concluded that The power output with adaptive reference algorithm at the load terminal is coming to be 6.5 kilo Watts approximately where as with P & O it is calculated to be 1.5 kilo watts approximately. Hence it is a better proposed algorithm as compared to traditional P & O technique

Published
2019-02-12
How to Cite
Kumar, S., & Sahu, B. R. (2019). IMPROVEMENT IN OUTPUT POWER BY DESIGNING ADAPTIVE REFERENCE CONTROL FOR BOOST CONVERTER IN SOLAR SYSTEM. IJOSTHE, 6(2), 9. Retrieved from https://ijosthe.com/ojssports/index.php/ojssports/article/view/82