A Review on Effect of Geometrical Variation in IC Engine Cylinder

Authors

  • Sourabh Kumar
  • Mr. Rajesh Soni

Keywords:

CAD, CFD, engine, Thermal conductivity

Abstract

When fuel is burned in an engine, heat is generated. Additional heat is also created by the friction between the moving parts. The engine cylinder is one of the most important automotive components which is exposed to temperature fluctuations and high thermal loads. To cool the cylinder, fins are provided on the surface of the cylinder to increase the rate of heat transfer. When performing a thermal analysis of the engine cylinder fins, it is helpful to know the heat dissipation within the cylinder. We know that by increasing the area, we can increase the rate of heat dissipation, so designing such a large and complex motor is very difficult. The main objective is to analyze the thermal properties by varying the geometry, material and thickness of the cylinder fins using a CAD software.

Author Biographies

Sourabh Kumar

M Tech Scholar

School of Research and Technology,

People's University

Bhopal, M. P, India

Mr. Rajesh Soni

Assistance Professor

School of Research and Technology,

People's University

Bhopal, M. P, India

References

N. Arul, G.Srinivasan, K. Vignesh and S.Vijayaraj “Experimental and Computational Analysis of Various Types of Fins”, International Journal For Research In Mechanical & Civil Engineering, Vol.-3, Issue-4 ,2017 .

Praveen Choudhary, Satyendra Kumar Pankaj, Mukul Tomar and Dr Harish Chandra Thakur, “Unsteady Analysis of Heated Inclined Fin-plate Placed Inside Square Enclosure”, 2017 2nd (I2CT), 978-1-5090-4307 IEEE.

Obula Reddy Kummitha and B. V. R. Reddy, “Thermal Analysis of cylinder block with fins for different materials using ANSYS”, Materials Today: Proceedings 4 8142–8148, 2017.

Aju Joseph, Amal Dev C George, Aneesh K, Fibin Shafi, Jijo Joseph and Arunraj A, “Heat Transfer Enhancement Perforations: A Review”, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 6, Issue No 1, 2017.

A Sathishkumar, MD KathirKaman, S Ponsankar and C Balasuthagar, “Design and thermal analysis on engine cylinder fins by modifying its material and geometry”, JCPS Vol. 9 Issue No4, 2016.

Rahul Gupta, Rajneesh Kumar and Prateek Kumar Verma, “Heat Transfer Analysis of Engine Cylinder Fins Having Triangular Shape”, International Journal of Scientific & Engineering Research, Vol. 7, Issue No. 5, 2016.

L. Natrayan, G.Selvaraj, N.Alagirisamy and M.S.Santhosh, “Thermal Analysis of Engine Fins with Different Geometries”, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 5, Issue 5, May 2016,.

Shubham Shrivastava and Shikar Upadhyay, “Thermal Analysis of IC Engine Cylinder Block with Fins Perpendicular to the Axis of Piston Movement”, International Journal of Mechanical and Industrial Technology, Vol. 3, Issue 2, pp: (139-149).

Pinja Laaksonen, Timo Hyppänen and Tero Tynjälä, “Effects Of Fin Parameters On Gas-Side Heat Transfer Performance Of H-Type Finned Tube Bundle In a Waste Heat Recovery Boiler”, 2015.

Sachin Kumar Gupta, Harishchandra Thakur and Divyank Dubey “Required of Cooling System in IC Engines”, HCTL Open (IJTIR) Vol.14, April 2015.

Panduga Eeshwar Prasad, Y. Dilip Kumar and Dr. P. H. V. Sesha Talpa Sai “Thermal Analyis Of Engine By Changing Fluid And Thickness Of Fins”, International Journal Of Emerging Trends In Technology And Science, Vol.6, Issue No 1, 2015.

Downloads

Published

2021-06-24

How to Cite

Kumar, S. ., & Soni, M. R. . (2021). A Review on Effect of Geometrical Variation in IC Engine Cylinder. SMART MOVES JOURNAL IJOSTHE, 8(3), 10–12. Retrieved from http://ijosthe.com/index.php/ojssports/article/view/162