PLATE FIN AND TUBE HEAT EXCHANGER

Authors

  • Mehtab Alam M.Tech Scholar Department of Mechanical Engineering Sagar Institute of Research & Technology, Bhopal
  • Dr. Dharmendra Singh Rajput Professor Department of Mechanical Engineering Sagar Institute of Research & Technology Bhopal

Abstract

The main objective of the present work is to investigation of optimum design of plate fin tube heat exchanger using Computational fluid dynamic approach and maximizing thermal performance. There are total five designs of plate fin and tube heat exchanger are used in present work and CFD analysis have been performed in it to get maximum heat transfer. It has been observed from CFD analysis that the maximum heat transfer can be achieved from plate fin and tube heat exchanger with elliptical tube arrangement inclined at 30o with 23.22% more heat transfer capacity as compared to circular tube plate pin heat exchanger. So that it is recommended that if the plate fins and tube heat exchanger with inclined elliptical tube used in place of circular tube arrangement, batter heat transfer can be achieved.

Downloads

Published

2019-01-10

Issue

Vol. 5 No. 6 (2018): Volume 5 Issue 6 December 2018

Section

Articles

License

You are free to:

  1. Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
  2. Adapt — remix, transform, and build upon the material for any purpose, even commercially.
  3. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  1. Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

How to Cite

PLATE FIN AND TUBE HEAT EXCHANGER. (2019). International Journal Online of Sports Technology & Human Engineering, 5(6), 5. https://ijosthe.com/index.php/ojssports/article/view/77