IMPROVEMENT IN OUTPUT POWER BY DESIGNING ADAPTIVE REFERENCE CONTROL FOR BOOST CONVERTER IN SOLAR SYSTEM

Authors

  • Sandeep Kumar M.Tech Scholar Technocrats Institute Of Technology Science, Bhopal (M.P.)
  • Brijesh Roshan Sahu Assistant Professor Technocrats Institute Of Technology Science, Bhopal (M.P.)

Abstract

Maximum power point tracking (MPPT) techniques are used in photovoltaic (PV) systems to maximize the PV array output power by tracking continuously the maximum power point (MPP) which depends on panels temperature and on irradiance conditions. In this work we have made a comparison between P & O algorithm with proposed adaptive reference algorithm. It has been concluded that The power output with adaptive reference algorithm at the load terminal is coming to be 6.5 kilo Watts approximately where as with P & O it is calculated to be 1.5 kilo watts approximately. Hence it is a better proposed algorithm as compared to traditional P & O technique

Downloads

Published

2019-02-12

Issue

Vol. 6 No. 1 (2019): Volume 6, Issue 1, February 2019

Section

Articles

License

You are free to:

  1. Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
  2. Adapt — remix, transform, and build upon the material for any purpose, even commercially.
  3. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  1. Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

How to Cite

IMPROVEMENT IN OUTPUT POWER BY DESIGNING ADAPTIVE REFERENCE CONTROL FOR BOOST CONVERTER IN SOLAR SYSTEM. (2019). International Journal Online of Sports Technology & Human Engineering, 6(1), 9. https://ijosthe.com/index.php/ojssports/article/view/82